The Trijicon ACOG thumb screw for M16 handle mounting (TA53) replaces hex screw below handle.
The Reflex A.R.M.S. #15 Throw Lever mount (RX23) is designed for Trijicon Reflex sights.
The Reflex Flattop mount (RX14) clamps onto flattop receiver type M16/AR15 rifles, M4 Carbines and similar weapns with knob. Height is .640.
This Reflex sight (RX10) fits the M16 handle like other Trijicon ACOG riflescopes. A finger operated wing nut is included with the mount.
This model can not be used in conjunction with the Reflex 14.4 MOA sight(RX09) because of the cyalume port.
The Reflex polarizing filter (RX20) is an accessory for a Trijicon Reflex sight that improves the aiming dot contrast when used with a flashlight, varying lighting conditions, or when aiming at a light source.
The light transmission though this filter can be adjusted by rotating the outer ring of the filter. The range from lightest to darkest is reached every 90 degree turn.
The Reflex Tenebraex KillFlash (RX22) is an anti-reflection device for Trijicon Reflex Sights.
The Reflex weaver mount (RX11) is used to clamp onto Weaver rail. The mount is attached to the reflex with a cap skew kit, which is included with the mount. Height is .295 inches.