The EOTECH 556.A65/1 Holo Weapon Sight is the 1st electro-optic sighting system to apply holographic technology to small and medium-sized weapon platforms. When used in Close Quarters Battle (CQB) environments, this revolutionary weapon optic delivers amazing speed and accuracy gains, uncompromising use of peripheral vision, leaves no muzzle-side optical signature and is packaged in a compact, durable unit. It features Buttons on left side of sight (not in back) to work specifically with NV or magnifiers, CR123 Lithium batteries; 65 MOA ring/1 MOA dot reticle, Raised 7mm base with knurled cross bolt.

The EOTech 556.A65/1 mounts to any universal Picatinny mounting rail (supports standard Weaver dovetail) with an integral mounting platform for adaptation to user preferred eye relief. The EOTech Holo Sight can interface to any standard issue M16 or M4 variant in either a fixed carry handle or flattop receiver, and with no modifications to the weapon. The M16 and M4 mounting platforms provide for the functionally critical aspect of co-witnessing the iron sights within the HWS's Heads Up Display while maintaining the operator's critical check weld position.

The 556.A65 Holographic Weapon Sight have been upgraded to submersible 33 ft. water depth. Within this same feature upgrade, the membrane pad has been redesigned to greatly improve the tactile feel of the push button switches. The switches are designed with raised inlays to provide further separation between switch controls and reduce audible signature.

EOTech 556.A65 Holo Weapon Sight is Compatible with Gen. I-III+ Night Vision Systems (tandem operation). Includes ruggedized hood assembly and knobbed, tooless mounting bolt. Interfaces to standard 1" Weaver dovetail/Picatinny rail. Factory pre-mounted with 2D Standard reticle pattern. Dual quick-release throw levers for instant attachment.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce. The Holographic Weapon Sight Model 556.A65 is controlled under the U.S. International Traffic in Arms Regulations (ITAR) and may not be exported without the proper authorization by the U.S. Department of State.

The EOTech 512 Holographic Weapon Sight (Revision F, Standard Reticle, AA type batteries) is the economical solution that sacrifices very little. This EOTech scope includes many of the bells and whistles the holo sight is known for. This tactical optic is perfect for agencies that want the best in Close Quarters Battle (CQB) speed and versatility, without the need for Night Vision compatibility.

The Revision F family now features exteded Battery Life. Through an extensive research and development effort, EOTech's team of engineers has optimized the holographic fabrication process to dramatically improve the optical efficiency of the Holo Weapon Sight. The result is 2x the battery life compared to previously published EOTech statistics.

In addition EOTech's Revision F features enhanced electronic circuitry which allows the brightness adjustment range to expand by a factor of 20x !! Now, the impressive low light capabilities of the Holographic Weapon Sight are complimented with a reticle that is 2x brighter at the highest setting. Already recognized as the brightest sight in today's military market, the EOTEch Sights further eliminates any concern of reticle washout in desert or artic conditions.
The holosight's smaller, lighter design is also perfect for tactical environments, hunting game, or knocking down targets at a more affordable price point.

This EOTech Holographic Weapon Sight (HWS) is the 1st electro-optic sighting system to apply holographic technology to small and medium-sized weapon platforms. When used in Close Quarters Battle (CQB) environments, this revolutionary weapon optic delivers amazing speed and accuracy gains, uncompromising use of peripheral vision, leaves no muzzle-side optical signature and is packaged in a compact, durable unit.

Now deployed with elite Special Forces and SWAT teams the world over, the EOTech Holo Sights deliver vastly improved shooting performance for all levels of operators.

The EOTech Holo Sight mounts to any universal Picatinny mounting rail (supports standard Weaver dovetail) with an integral mounting platform for adaptation to user preferred eye relief. This EOTech Holo Sight can interface to any standard issue M16 or M4 variant in either a fixed carry handle or flattop receiver, and with no modifications to the weapon. The M16 and M4 mounting platforms provide for the functionally critical aspect of co-witnessing the iron sights within the HWS's Heads Up Display while maintaining the operator's critical check weld position.

The EOTech 512 Holo Sight uses two AA type batteries.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

The EOTech 512 Holographic Weapon Sight Realtree Finish (Revision F, Standard Reticle, AA type batteries) is the economical solution that sacrifices very little. This EOTech scope includes many of the bells and whistles the holo sight is known for. This tactical optic is perfect for agencies that want the best in Close Quarters Battle (CQB) speed and versatility, without the need for Night Vision compatibility.

The Revision F family now features exteded Battery Life. Through an extensive research and development effort, EOTech's team of engineers has optimized the holographic fabrication process to dramatically improve the optical efficiency of the Holo Weapon Sight. The result is 2x the battery life compared to previously published EOTech statistics.

In addition EOTech's Revision F features enhanced electronic circuitry which allows the brightness adjustment range to expand by a factor of 20x !! Now, the impressive low light capabilities of the Holographic Weapon Sight are complimented with a reticle that is 2x brighter at the highest setting. Already recognized as the brightest sight in today's military market, the EOTEch Sights further eliminates any concern of reticle washout in desert or artic conditions.
The holosight's smaller, lighter design is also perfect for tactical environments, hunting game, or knocking down targets at a more affordable price point.

This EOTech Holographic Weapon Sight (HWS) is the 1st electro-optic sighting system to apply holographic technology to small and medium-sized weapon platforms. When used in Close Quarters Battle (CQB) environments, this revolutionary weapon optic delivers amazing speed and accuracy gains, uncompromising use of peripheral vision, leaves no muzzle-side optical signature and is packaged in a compact, durable unit.

Now deployed with elite Special Forces and SWAT teams the world over, the EOTech Holo Sights deliver vastly improved shooting performance for all levels of operators.

The EOTech Holo Sight mounts to any universal Picatinny mounting rail (supports standard Weaver dovetail) with an integral mounting platform for adaptation to user preferred eye relief. This EOTech Holo Sight can interface to any standard issue M16 or M4 variant in either a fixed carry handle or flattop receiver, and with no modifications to the weapon. The M16 and M4 mounting platforms provide for the functionally critical aspect of co-witnessing the iron sights within the HWS's Heads Up Display while maintaining the operator's critical check weld position.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

The EOTech 512 Holographic Weapon Sight Mossy Oak Finish (Revision F, Standard Reticle) is the economical solution that sacrifices very little. This EOTech scope includes many of the bells and whistles the holo sight is known for. This tactical optic is perfect for agencies that want the best in Close Quarters Battle (CQB) speed and versatility, without the need for Night Vision compatibility.

The Revision F family now features exteded Battery Life. Through an extensive research and development effort, EOTech's team of engineers has optimized the holographic fabrication process to dramatically improve the optical efficiency of the Holo Weapon Sight. The result is 2x the battery life compared to previously published EOTech statistics.

In addition EOTech's Revision F features enhanced electronic circuitry which allows the brightness adjustment range to expand by a factor of 20x !! Now, the impressive low light capabilities of the Holographic Weapon Sight are complimented with a reticle that is 2x brighter at the highest setting. Already recognized as the brightest sight in today's military market, the EOTEch Sights further eliminates any concern of reticle washout in desert or artic conditions.
The holosight's smaller, lighter design is also perfect for tactical environments, hunting game, or knocking down targets at a more affordable price point.

This EOTech Holographic Weapon Sight (HWS) is the 1st electro-optic sighting system to apply holographic technology to small and medium-sized weapon platforms. When used in Close Quarters Battle (CQB) environments, this revolutionary weapon optic delivers amazing speed and accuracy gains, uncompromising use of peripheral vision, leaves no muzzle-side optical signature and is packaged in a compact, durable unit.

Now deployed with elite Special Forces and SWAT teams the world over, the EOTech Holo Sights deliver vastly improved shooting performance for all levels of operators.

The EOTech Holo Sight mounts to any universal Picatinny mounting rail (supports standard Weaver dovetail) with an integral mounting platform for adaptation to user preferred eye relief. This EOTech Holo Sight can interface to any standard issue M16 or M4 variant in either a fixed carry handle or flattop receiver, and with no modifications to the weapon. The M16 and M4 mounting platforms provide for the functionally critical aspect of co-witnessing the iron sights within the HWS's Heads Up Display while maintaining the operator's critical check weld position.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

The EOTECH 516.A65/1 Holographic Weapon Sight is the economical solution that sacrifices very little. This EOTech sight includes many of the bells and whistles the holo sight is known for. The unit is perfect for agencies that want the best in Close Quarters Battle (CQB) speed and versatility, without the need for Night Vision compatibility.

The EOTECH 516.A65/1 is the 1st electro-optic sighting system to apply holographic technology to small and medium-sized weapon platforms. When used in Close Quarters Battle (CQB) environments, this revolutionary weapon optic delivers amazing speed and accuracy gains, uncompromising use of peripheral vision, leaves no muzzle-side optical signature and is packaged in a compact, durable unit.

Now deployed with elite Special Forces and SWAT teams the world over, the EOTech Holo Sights deliver vastly improved shooting performance for all levels of operators.

The EOTECH 516.A65/1 Holo Weapon Sight mounts to any universal Picatinny mounting rail (supports standard Weaver dovetail) with an integral mounting platform for adaptation to user preferred eye relief. This EOTech Holo Sight can interface to any standard issue M16 or M4 variant in either a fixed carry handle or flattop receiver, and with no modifications to the weapon. The M16 and M4 mounting platforms provide for the functionally critical aspect of co-witnessing the iron sights within the HWS's Heads Up Display while maintaining the operator's critical check weld position.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce. The Holographic Weapon Sight Model 516.A65/1 is controlled under the U.S. International Traffic in Arms Regulations (ITAR) and may not be exported without the proper authorization by the U.S. Department of State.

The new EOTech 517.A65 Holographic Weapon Sight has been developed to optimize the functionality of the Holographic Weapon Sight.

The EOTech 517 is the non-nightvision version of 557, except that it does not feature the .223 ballistic reticle. Rather, it consists of the standard 65 MOA ring and 1 MOA aiming dot.

The buttons have been moved from the back to the left side for instant access, allowing a magnifier or a back up iron sight to fit closely to the Sight body. This new button position allows the user to operate the HWS function switches easier than ever before.

Additionally, a portion of the front base has been raised to allow the sight to fit over standard hand guards found on many M-4 or M-16 style weapons

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce. The Holographic Weapon Sight Model 516.A65/1 is controlled under the U.S. International Traffic in Arms Regulations (ITAR) and may not be exported without the proper authorization by the U.S. Department of State.

The EOTech XPS2-1 Holographic Weapon Sight is shortest model sight yet! This sight is smaller than the former N-cell battery sight (511/551) and runs on a single 123 battery. It also has a longer battery life than the N-cell style sights.

Smaller,lighter and always fast with three reticle options XPS2-1 features the new single battery configuration. Also the XPS2-1 allows more rail space than ever, leaving more room for rear iron sights or NV mount.

Single transverse 123 battery to reduce sight length, shortened base only requires at most 2 3/4 inch of rail space compared to the 4 inch N battery sights. Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap; better sealing is achieved.

Battery compartment is now separated from the base to allow it to hover over the delta ring of the rifle, average battery life at brightness level 12 is roughly 500-600 hours, 3X battery life of N cell sights. The Holo Soght has three reticle options: 0- 65MOA circle with 1 MOA aiming dot, 1-single 1MOA aiming dot, 2-65MOA circle with two 1MOA aiming dots.

EOTech XPS is available in Night Vision (XPS3) and non- Night Vision (XPS2) versions. The numbers reflect the number of the buttons on the back of the sight.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

The EOTech XPS2-2 Holographic Weapon Sight is shortest model sight yet! This sight is smaller than the former N-cell battery sight (511/551) and runs on a single 123 battery. It also has a longer battery life than the N-cell style sights.

Smaller,lighter and always fast with three reticle options XPS2-2 features the new single battery configuration. Also the XPS2-2 allows more rail space than ever, leaving more room for rear iron sights or NV mount.

Single transverse 123 battery to reduce sight length, shortened base only requires at most 2 3/4 inch of rail space compared to the 4 inch N battery sights. Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap; better sealing is achieved.

Battery compartment is now separated from the base to allow it to hover over the delta ring of the rifle, average battery life at brightness level 12 is roughly 500-600 hours, 3X battery life of N cell sights. The Holo Soght has three reticle options: 0- 65MOA circle with 1 MOA aiming dot, 1-single 1MOA aiming dot, 2-65MOA circle with two 1MOA aiming dots.

EOTech XPS is available in Night Vision (XPS3) and non- Night Vision (XPS2) versions. The numbers reflect the number of the buttons on the back of the sight.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

The EOTech XPS3-2 Holographic Weapon Sight is shortest model sight yet! This sight is smaller than the former N-cell battery sight (511/551) and runs on a single 123 battery. It also has a longer battery life than the N-cell style sights.

Smaller,lighter and always fast with three reticle options XPS3-2 features the new single battery configuration. Also the XPS3-2 allows more rail space than ever, leaving more room for rear iron sights or NV mount.

Single transverse 123 battery to reduce sight length, shortened base only requires at most 2 3/4 inch of rail space compared to the 4 inch N battery sights. Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap; better sealing is achieved.

Battery compartment is now separated from the base to allow it to hover over the delta ring of the rifle, average battery life at brightness level 12 is roughly 500-600 hours, 3X battery life of N cell sights. The Holo Soght has three reticle options: 0- 65MOA circle with 1 MOA aiming dot, 1-single 1MOA aiming dot, 2-65MOA circle with two 1MOA aiming dots.

EOTech XPS is available in Night Vision (XPS3) and non- Night Vision (XPS2) versions. The numbers reflect the number of the buttons on the back of the sight.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

The EOTech XPS2-0 Holographic Weapon Sight is shortest model sight yet! This sight is smaller than the former N-cell battery sight (511/551) and runs on a single 123 battery. It also has a longer battery life than the N-cell style sights.

Smaller,lighter and always fast with three reticle options XPS2-0 features the new single battery configuration. Also the XPS2-0 allows more rail space than ever, leaving more room for rear iron sights or NV mount.

Single transverse 123 battery to reduce sight length, shortened base only requires at most 2 3/4 inch of rail space compared to the 4 inch N battery sights. Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap; better sealing is achieved.

Battery compartment is now separated from the base to allow it to hover over the delta ring of the rifle, average battery life at brightness level 12 is roughly 500-600 hours, 3X battery life of N cell sights. The Holo Soght has three reticle options: 0- 65MOA circle with 1 MOA aiming dot, 1-single 1MOA aiming dot, 2-65MOA circle with two 1MOA aiming dots.

EOTech XPS is available in Night Vision (XPS3) and non- Night Vision (XPS2) versions. The numbers reflect the number of the buttons on the back of the sight.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

A lighter, smaller version of the popular EOTech 552, the EOTech 551 Holographic Weapon Sight, Standard Reticle (Revision F, model 551) offers the same durability and function, but in a more compact unit. At 4 inches in length, this EOTech holosight takes up less valuable rail space, leaving more room for a rear irom sight or Night Vision mount.

The Revision F family now features exteded Battery Life. Through an extensive research and development effort, EOTech's team of engineers has optimized the holographic fabrication process to dramatically improve the optical efficiency of the Holo Weapon Sight. The result is 2x the battery life compared to previously published EOTech statistics.

In addition EOTech's Revision F features enhanced electronic circuitry which allows the brightness adjustment range to expand by a factor of 20x !! Now, the impressive low light capabilities of the Holographic Weapon Sight are complimented with a reticle that is 2x brighter at the highest setting. Already recognized as the brightest sight in today's military market, the EOTEch's Holo Weapon Sight further eliminates any concern of reticle washout in desert or artic conditions.

The EOTech Holosight is the 1st electro-optic sighting system to apply holographic technology to small and medium-sized weapon platforms. When used in Close Quarters Battle (CQB) environments, this revolutionary holographic weapon optic delivers amazing speed and accuracy gains, uncompromising use of peripheral vision, leaves no muzzle-side optical signature and is packaged in a compact, durable unit.

Now deployed with elite Special Forces and SWAT teams the world over, the EOTech Holosight 551 delivers vastly improved shooting performance for all levels of operators. The EOTech Holosight mounts to any universal Picatinny mounting rail (supports standard Weaver dovetail) with an integral mounting platform for adaptation to user preferred eye relief. This Holographic Weapon Sight can interface to any standard issue M16 or M4 variant in either a fixed carry handle or flattop receiver, and with no modifications to the weapon. The M16 and M4 mounting platforms provide for the functionally critical aspect of co-witnessing the iron sights within the EOTech Holosight's Heads Up Display while maintaining the operator's critical check weld position.

The EOTech 551 Holosight's unique switch allows the operator to instantly drop the holographic reticle's brightness to the Night Vision mode of operation. The operator has the ability to toggle back and forth between the Night Vision mode and the normal day/night operation within fractions of a second. The EOTech Holosight has 10 distinct night vision settings to provide maximum flexibility to the operator. Typically 3 to 4 brightness settings are not enough to support a host of constantly changing conditions including manufacturing variances in the sensitivities of the image intensifier tubes, varying ambient environments, and varying light gathering sensitivities of the human eye across users. This EOTech Holosight still maintains the 20 normal brightness settings for normal day/night operations.

The typical configuration is with both the monocular night vision system and the EOTech Holosight mounted in tandem on the weapon's receiver. Operators can also witness the holographic reticle with head/helmet mounted monocular night vision image intensifier systems, even on a partial cheekweld on the weapon's stock. This allows the operator added flexibility and greater versatility when deploying with night vision systems in the ever changing battlefield environments.

EOTech 551 Holosight has been upgraded to submersible 33 ft. water depth. Within this same feature upgrade, the membrane pad has been redesigned to greatly improve the tactile feel of the push button switches. The switches are designed with raised inlays to provide further separation between switch controls and reduce audible signature.

The EOTech 551 Weapon Holosight (1 MOA Dot Reticle) uses two "N" type batteries.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

The EOTech 552 Holographic Sight (Revision F, Standard Reticle) is fully compatible with all generation levels of night vision intensifier tubes. A special night vision (NV) setting allows the operator to immediately drop the brightness intensity of the holographic reticle to eliminate any "halo" effect while viewing through an image intensifier tube. This EOTech Holographic Sight can be positioned in tandem behind night vision intensifiers without any "bloom" of the target area. Now, operators can combine the proven night vision technological advantage with a superior close quarters weapon optic to achieve greatly enhanced weapon aiming - in complete darkness.

The Revision F family now features exteded Battery Life. Through an extensive research and development effort, EOTech's team of engineers has optimized the holographic fabrication process to dramatically improve the optical efficiency of the Holo Weapon Sight. The result is 2x the battery life compared to previously published EOTech statistics.

In addition EOTech's Revision F features enhanced electronic circuitry which allows the brightness adjustment range to expand by a factor of 20x !! Now, the impressive low light capabilities of the Holographic Weapon Sight are complimented with a reticle that is 2x brighter at the highest setting. Already recognized as the brightest sight in today's military market, the EOTEch's Holo Weapon Sight further eliminates any concern of reticle washout in desert or artic conditions.

The EOTech Holographic Sight's unique switch allows the operator to instantly drop the holographic reticle's brightness to the Night Vision mode of operation. The operator has the ability to toggle back and forth between the Night Vision mode and the normal day/night operation within fractions of a second. The EOTech 552 Holographic Sight has 10 distinct night vision settings to provide maximum flexibility to the operator. Typically 3 to 4 brightness settings are not enough to support a host of constantly changing conditions including manufacturing variances in the sensitivities of the image intensifier tubes, varying ambient environments, and varying light gathering sensitivities of the human eye across users. This EOTech Holographic Sight still maintains the 20 normal brightness settings for normal day/night operations.

The typical configuration is with both the monocular night vision system and the EOTech Holographic Sight mounted in tandem on the weapon's receiver. Operators can also witness the holographic reticle with head/helmet mounted monocular night vision image intensifier systems, even on a partial cheekweld on the weapon's stock. This allows the operator added flexibility and greater versatility when deploying with night vision systems in the ever changing battlefield environments.

EOTech Holographic Sight's field of view is nearly 4 times as wide as the Aimpoint Comp M2's. The greater field of view means improved situational awareness and faster threat identification. This EOTech Holosight offers 10 night vision reticle settings compared to the Aimpoint Comp's four settings. The holographic sight uses state-of-the-art digital electronics design. Twenty brightness levels ensure proper brightness control in either low light or very bright sunlight. An on-board microprocessor provides automatic battery check indicator, up/down brightness scrolling and programmable auto shutdown features. All electronics of this EOTech 552 Holographic Sight are fully encapsulated in shock absorbing resin compound. Built tough enough to withstand Mil-Spec drop tests and remain operational, the Heads-Up display is constructed with a 3-layer 3/16” thick shatterproof laminate glass and is protected by a “roll bar” made of aerospace composite.

All EOTech Holographic sight's optical surfaces are flat and treated with anti-reflective coatings eliminating additional muzzle side signature due to reflective glare. No need for costly glare elimination filters that reduce the effective light transmission and further dim the target area. The optical cavity is Nitrogen purged for fogproof and waterproof performance down to 10 feet. Throughout the reticle’s 30 brightness settings, it remains completely hidden downrange, even from night vision devices.

The EOTech 552 Holographic Sight (Standard Reticle) uses two AA type batteries.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

Standardized by the DEA, ATF, and FBI SWAT, the EOTech 552.XR308 Holographic Weapon Sight (XR.308 Reticle, AA Batteries) is by far the most popular Holographic Weapon Sight model. This NV compatible, AA battery model is the sight of choice by military units like Stryker Brigade, 10th Mountain, and 3rd Infantry. It is battle proven to withstand the abuse that any harsh environment, high powered weapon platform, or military mission can dish out.

The Revision F family now features exteded Battery Life. Through an extensive research and development effort, EOTech's team of engineers has optimized the holographic fabrication process to dramatically improve the optical efficiency of the Holo Weapon Sight. The result is 2x the battery life compared to previously published EOTech statistics.

In addition EOTech's Revision F features enhanced electronic circuitry which allows the brightness adjustment range to expand by a factor of 20x !! Now, the impressive low light capabilities of the Holographic Weapon Sight are complimented with a reticle that is 2x brighter at the highest setting. Already recognized as the brightest sight in today's military market, the EOTEch's Holo Weapon Sight further eliminates any concern of reticle washout in desert or artic conditions.

The EOTech 552.XR308 Holographic Weapon Sight with .XR-308 reticle provides a multi purpose image that is calibrated to the specific trajectory of the M240. The center dot is used for 0-300 meters. Three additional calibrated aiming dots are for 600m, 900m and 1.2km. No matter what .308 cal platform you own, the 552.XR308 can take your speed and accuracy gains to the next level. In addition to the M240 machine gun, the sight works with other .308 platforms such as Remington 700s or AR-10 style rifles.

The EOTech 552.XR308 Holographic Weapon Sight uses laser light to illuminate a holographic reticle pattern embedded in the heads-up display window and forms a virtual image of a reticle pattern. The shooter looks through the heads-up display window and sees a bright red image of a reticle pattern projected onto the target plane. There is absolutely no light projected onto the target plane. The EOTech 552.XR308 Holographic Weapon Sight has no magnification.

The EOTech 552.XR308 Holo Weapon Sight is equipped with mounting hardware to attach to a standard 1" dovetail or Picatinny style rail. To achieve the best results and accuracy, the HWS must be mounted properly.

Users manual for EOTech 552.XR308 Holo Weapon Sight you can find HERE.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

Standardized by the DEA, ATF, and FBI SWAT, the EOTech 552.XR500 Holo Weapon Sight (Revision F, XR.500 Reticle, AA Batteries) is by far the most popular Holographic Weapon Sight model. This NV compatible, AA battery model is the sight of choice by military units like Stryker Brigade, 10th Mountain, and 3rd Infantry. It is battle proven to withstand the abuse that any harsh environment, high powered weapon platform, or military mission can dish out.

The Revision F family now features exteded Battery Life. Through an extensive research and development effort, EOTech's team of engineers has optimized the holographic fabrication process to dramatically improve the optical efficiency of the Holo Weapon Sight. The result is 2x the battery life compared to previously published EOTech statistics.

In addition EOTech's Revision F features enhanced electronic circuitry which allows the brightness adjustment range to expand by a factor of 20x !! Now, the impressive low light capabilities of the Holographic Weapon Sight are complimented with a reticle that is 2x brighter at the highest setting. Already recognized as the brightest sight in today's military market, the EOTEch's Holo Weapon Sight further eliminates any concern of reticle washout in desert or artic conditions.

EOTech 552.XR500 Holo Weapon Sight with customized .XR500 reticle provides a multi purpose image that is calibrated to the specific trajectory of the .50 cal BMG round on an M2. The center dot is used for 0-300 meters. Three additional calibrated aiming dots are for 1km, 1.5km and 2km. No matter what .50 cal platform you own, the 552.XR500 can take your speed and accuracy gains to the next level. In addition to the M2 machine gun, the sight works with other .50 cal platforms such as Barrett, Cobb, and many other .50 cal rifles.

The EOTech 552.XR500 Sight uses laser light to illuminate a holographic reticle pattern embedded in the heads-up display window and forms a virtual image of a reticle pattern. The shooter looks through the heads-up display window and sees a bright red image of a reticle pattern projected onto the target plane. There is absolutely no light projected onto the target plane. The 552.XR500 has no magnification.

The EOTech 552.XR500 Holographic Sight is equipped with mounting hardware to attach to a standard 1" dovetail or Picatinny style rail. To achieve the best results and accuracy, the HWS must be mounted properly.

Users manual for EOTech 552.XR500 Holo Weapon Sight you can find HERE.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

The EOTech 552.D1 Holographic Weapon Sight (Revision F, 1 MOA Dot Reticle) is fully compatible with all generation levels of night vision intensifier tubes. A special night vision (NV) setting allows the operator to immediately drop the brightness intensity of the holographic reticle to eliminate any "halo" effect while viewing through an image intensifier tube. This EOTech 552.D1 Weapon Sight can be positioned in tandem behind night vision intensifiers without any "bloom" of the target area. Now, operators can combine the proven night vision technological advantage with a superior close quarters weapon optic to achieve greatly enhanced weapon aiming - in complete darkness.

The Revision F family now features exteded Battery Life. Through an extensive research and development effort, EOTech's team of engineers has optimized the holographic fabrication process to dramatically improve the optical efficiency of the Holo Weapon Sight. The result is 2x the battery life compared to previously published EOTech statistics.

In addition EOTech's Revision F features enhanced electronic circuitry which allows the brightness adjustment range to expand by a factor of 20x !! Now, the impressive low light capabilities of the Holographic Weapon Sight are complimented with a reticle that is 2x brighter at the highest setting. Already recognized as the brightest sight in today's military market, the EOTEch's Holo Weapon Sight further eliminates any concern of reticle washout in desert or artic conditions.

The EOTech 552.D1 Weapon Sight's unique switch allows the operator to instantly drop the holographic reticle's brightness to the NV mode of operation. The operator has the ability to toggle back and forth between the NV mode and the normal day/night operation within fractions of a second. This EOTech Weapon Sight has 10 distinct night vision settings to provide maximum flexibility to the operator. Typically 3 to 4 brightness settings are not enough to support a host of constantly changing conditions including manufacturing variances in the sensitivities of the image intensifier tubes, varying ambient environments, and varying light gathering sensitivities of the human eye across users. The EOTech 552.D1 Weapon Sight still maintains the 20 normal brightness settings for normal day/night operations.

The typical configuration is with both the monocular night vision system and the EOTech Weapon Sight mounted in tandem on the weapon's receiver. Operators can also witness the holographic reticle with head/helmet mounted monocular night vision image intensifier systems, even on a partial cheekweld on the weapon's stock. This allows the operator added flexibility and greater versatility when deploying with night vision systems in the ever changing battlefield environments.

The EOTech Weapon Sight's field of view is nearly 4 times as wide as the Aimpoint Comp M2's. The greater field of view means improved situational awareness and faster threat identification. This EOTech Weapon Sight offers 10 night vision reticle settings compared to the Aimpoint Comp's four settings.
The holographic weapon sight uses state-of-the-art digital electronics design. Twenty brightness levels ensure proper brightness control in either low light or very bright sunlight. An on-board microprocessor provides automatic battery check indicator, up/down brightness scrolling and programmable auto shutdown features. All electronics of the EOTech Weapon Sight are fully encapsulated in shock absorbing resin compound.

Built tough enough to withstand Mil-Spec drop tests and remain operational, the Heads-Up display is constructed with a 3-layer 3/16” thick shatterproof laminate glass and is protected by a “roll bar” made of aerospace composite. All optical surfaces of the of the EOTech Weapon Sight are flat and treated with anti-reflective coatings eliminating additional muzzle side signature due to reflective glare. No need for costly glare elimination filters that reduce the effective light transmission and further dim the target area.
The optical cavity is Nitrogen purged for fogproof and waterproof performance down to 10 feet. Throughout the reticle’s 30 brightness settings, it remains completely hidden downrange, even from night vision devices.

The EOTech 552.D1 Weapon Sight (1 MOA Dot Reticle) uses two AA type batteries.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.

L3 EOTech Military Holographic Weapon Sight 553BLK (Revision F, Black Finish) - the latest from L3 Communications EOTech division features CR123 Lithium battery, reticle pattern with 65 MOA and 1 MOA aiming dot, Dual ARMS® throw levers with 7mm raised base. This EOTech Holosight is waterproof and has 66 ft submersion rating. The Eotech Holosight 553 is a top of the line Eotech scope and it is compatible with Gen I-III+ Night Vision Systems (tandem operation).

The Revision F family now features exteded Battery Life. Through an extensive research and development effort, EOTech's team of engineers has optimized the holographic fabrication process to dramatically improve the optical efficiency of the Holo Weapon Sight. The result is 2x the battery life compared to previously published EOTech statistics.

In addition EOTech's Revision F features enhanced electronic circuitry which allows the brightness adjustment range to expand by a factor of 20x !! Now, the impressive low light capabilities of the Holographic Weapon Sight are complimented with a reticle that is 2x brighter at the highest setting. Already recognized as the brightest sight in today's military market, the EOTEch's Holo Weapon Sight further eliminates any concern of reticle washout in desert or artic conditions.

The advantage of EOTech Military Holosight is holographic reticle patterns that are instantly visible in any light condition, instinctive to center regardless of shooting angle and always remain in view to achieve lightning quick reticle to target acquisition without covering or obscuring the point of aim.

The magic of EOTech sight is the edge they provide to you in close quarter or urban combat zones. L3-Communications EOTech Holosight will remain fully operational even when laminated window is obstructed by mud, snow, rain, or even damaged/shattered, as long as you can see through any portion of the laminated window, the entire reticle pattern will be visible on target... with point of aim/impact being maintained and EOTech Military Holosight is being fully functional, the operator can still engage with confidence.

The EOTech Holosight 553BLK employs a true Heads-Up Display that eliminates blind spots, constricted vision, or the tunnel vision associated with tubed sights. All user controls are flush to the holographic weapon sight's streamline housing with no protruding knobs, battery compartments or mounting rings blocking vision at the target area. True, 2 eyes open shooting is realized with EOTech Holosight. Instant threat identification is achieved by maximizing the operator's peripheral vision and ultimately gaining greater control of the engagement zone.

Twenty brightness levels of EOTech Holosight 553 ensure proper brightness control in either low light or very bright sunlight. An on-board microprocessor provides automatic battery check indicator, up/down brightness scrolling and programmable auto shutdown features. All HWS's state-of-the-art electronics are fully encapsulated in shock absorbing resin compound to withstand shock. The EOTech Holographic Weapon Sight has been designed and tested to provide consistent, reliable performance even in the most hostile operational environments. It is waterproof, fogproof, shockproof, and temperature proof.

The EOTech 553 Military Holosight is designed to withstand Mil-Spec drop tests and still remain fully operational and hold zero. The EOTech Holographic Sight has been extensively tested in a punishing recoil simulator generating 3,500 G's of acceleration in less than 0.5 milliseconds (the recoil of a .454 Casull revolver) as well as various environmental chambers). The EOTech Holosight's Heads Up Display is constructed with a 3 layer, shatterproof laminate glass that is 3/16" thick for added durability..

EOTech Holosight 553 does not emit any muzzle side position revealing light signature...the projected reticle pattern is visible only to the operator of L3 Communications EOTech 553. Even Gen III night vision equipment cannot detect muzzle side signature of the operator's position. All optical surfaces of this EOTech Holosight are flat and treated with anti-reflective coatings eliminating additional muzzle side signature due to reflective glare. No need for costly glare elimination filters that reduce the effective light transmission and further dim the target area.

EOTech Holosight 553BLK is fully compatible with all generation levels of night vision intensifier tubes. A special night vision (NV) setting allows the operator to immediately drop the brightness intensity of the holographic reticle to eliminate any "halo" effect while viewing through an image intensifier tube. Now, operators can combine the proven night vision technological advantage with a superior close quarters weapon optic such as EOTech 553 Holosight to achieve greatly enhanced weapon aiming - in complete darkness. Night Vision toggle Switch (10 Settings) Unlike active IR laser pointer systems, the EOTech Holographic Weapon Sight 553BLK is a passive system and emits no muzzle-side signature.

The EOTech 553 Holographic Weapon Sight uses two 123 lithium batteries.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce.
The Holographic Weapon Sight Model 553 is controlled under the U.S. International Traffic in Arms Regulations (ITAR) and may not be exported without the proper authorization by the U.S. Department of State.

The EOTech 555.A65 Holographic Weapon Sight (Standard Reticle, AA Batteries) is the 1st electro-optic sighting system to apply holographic technology to small and medium-sized weapon platforms. When used in Close Quarters Battle (CQB) environments, this revolutionary weapon optic delivers amazing speed and accuracy gains, uncompromising use of peripheral vision, leaves no muzzle-side optical signature and is packaged in a compact, durable unit.

The EOTech 555.A65 mounts to any universal Picatinny mounting rail (supports standard Weaver dovetail) with an integral mounting platform for adaptation to user preferred eye relief. The EOTech Holo Sight can interface to any standard issue M16 or M4 variant in either a fixed carry handle or flattop receiver, and with no modifications to the weapon. The M16 and M4 mounting platforms provide for the functionally critical aspect of co-witnessing the iron sights within the HWS's Heads Up Display while maintaining the operator's critical check weld position.

The 555.A65 Holo Sight have been upgraded to submersible 33 ft. water depth. Within this same feature upgrade, the membrane pad has been redesigned to greatly improve the tactile feel of the push button switches. The switches are designed with raised inlays to provide further separation between switch controls and reduce audible signature.

EOTech 555.A65 Holo Weapon Sight is Compatible with Gen. I-IV Night Vision Systems (tandem operation). Includes ruggedized hood assembly and knobbed, tooless mounting bolt. Interfaces to standard 1" Weaver dovetail/Picatinny rail. Factory pre-mounted with 2D Standard reticle pattern. Dual quick-release throw levers for instant attachment.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce. The Holographic Weapon Sight Model 555.A65 is controlled under the U.S. International Traffic in Arms Regulations (ITAR) and may not be exported without the proper authorization by the U.S. Department of State.

EOTECH 555.USMC Holographic Weapon Sight, Camo Finish - the latest from L3 Communications EOTech division. It features Camo finish, AA battery, reticle pattern with 65 MOA and 1 MOA aiming dot, Dual ARMS® throw levers with 7mm raised base. Eotech 555USMC is waterproof and has 66 ft submersion rating. It is compatible with Gen I-III+ Night Vison Systems (tandem operation).

Like All EOTech 550's Series the EOTECH 555.USMC has been upgraded to submersible 33 ft. water depth. Within this same feature upgrade, the membrane pad has been redesigned to greatly improve the tactile feel of the push button switches. The switches are designed with raised inlays to provide further separation between switch controls and reduce audible signature.

The EOTECH 555.USMC Holo Sight mounts to any universal Picatinny mounting rail (supports standard Weaver dovetail) with an integral mounting platform for adaptation to user preferred eye relief. The EOTech Holographic Sightcan interface to any standard issue M16 or M4 variant in either a fixed carry handle or flattop receiver, and with no modifications to the weapon. The M16 and M4 mounting platforms provide for the functionally critical aspect of co-witnessing the iron sights within the HWS's Heads Up Display while maintaining the operator's critical check weld position.

WARNING: This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR Part 746 and Supplement No.1 to Part 774; and Title 31 CFR) resale/re-export or transfer to certain designated countries is prohibited without prior written consent of the United States Department of Commerce. The Holographic Weapon Sight Model 555.USMC is controlled under the U.S. International Traffic in Arms Regulations (ITAR) and may not be exported without the proper authorization by the U.S. Department of State.